Part Number Hot Search : 
25015 BX3006 6S1265R QBSS560O 1256B0 SD200 BX3006 T5551
Product Description
Full Text Search
 

To Download FTR-SLPK024W Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SOLID STATE RELAY 1 Maximum Load current 1A
FTR-SL SERIES
n FEATURES
l
RoHS compliant
l l
l l
l
l
Ultra slim and light weight, SIL terminal type -- size: 5.0 (W) x 28.0 (L) x 5.0 (H): 40mm mounting area -- weight: approximately 4.0g Internal varistor and snubber circuit High insulation (between input and output) - dielectric strength 2500Vrms Include a zero cross circuit as standard equipment High frequency switching, long life and maintenance free High impact/vibration resistance, good for automatic assembly, washable RoHS compliant since date code: 6202 (February 2nd, 2006) Please see page 5 for more information
n ORDERING INFORMATION
[Example] FTR-SL (a) P (b) K (c)
024 W (d) (e)
(a) (b) (c) (d)
Series Name Load Voltage Input or Output Type Nominal Voltage
FTR-SL : FTR-SL Series P K 005 02 024 060 W : AC type : Output type : 5 VDC : 2 VDC : 24VDC : 60 VDC : With Zero Cross Circuit and Varistor
(e)
Zero Cross Circuit Output Protection
Note: The part number on the relay cover does not include 'FTR' Example: Ordering part number: FTR-SL-PK02W Stamped part number: SLPK02W
FTR-SL SERIES
n SPECIFICATION
Item Nominal Voltage Operate Range Iput side Must operate voltage Must release voltage Input Impedance Load voltage range Max. load current Outpt side 1 cycle surge current max. off-state leakage current max. on-state voltage drop Storage temperature range Operating temperature range Max. operating time Max. release time Output protection Other Case color weight FTR-SLPK005 W 5 VD C 3.75 to 6 VD C 3.75 VDC 1.25 VDC 560 10 % FTR-SLPK012 W FTR-SLPK024 W FTR-SLPK060 W 12 VD C 9 to 14.4 VD C 9.0 VD C 3.6 VD C 1.3K 10 % 24 VD C 18 to 28.8 VD C 18 VD C 8.4 VD C 2.4K 10 % 60 VD C 48 to 66 VD C 48 VD C 18 VD C 10K 10 %
24 to 250 AC Vrms 1 Arm s 50 A (60 Hz, 1 cycle) max. 1 mArms (60Hz, 220 AC Vrms) max. 1.3 V (1Arms, 50Hz) -40 to +100 C (no frost)
Temperature
-30 to +85 C (no frost) max. 1/2 cycle + 1ms max. 1/2 cycle + 1m s Snubber circuit and varisto r Blac k Approximately 4.0g
Time
n INSULATION
Item Resistance (initial) Surge Voltage AC .0A type Minimum 1,000 M (500VDC) 2,500V rms min. Note Input-output
2
FTR-SL SERIES
n BLOCK DIAGRAM
Load Insulaton Phototriac coupler
2
Input Input terminal circuit
CIrCuIt
Phototriac coupler ~4 Snubber circuit Output triac Output terminal ~3
Input/output Waveform (resistive load)
Trigger circuit
Source voltage of load ON Input signal OFF Load current
AC type
1
n CHARACTERISTIC DATA
1.2 Maximum Load Current (A) 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 100 Ambient Temperature (C)
FTR-SL SERIES
n DIMENSIONS
28+0 5+0
2-1 (1.9) 5.04 16.38
2-0.5 3.78
3.5
15+0
0.4 (1.2)
* Schematic (bottom view)
4 3 2 1 ~ ~ OUTPUT + INPUT
* PC board mounting hole layout (bottom view)
1.9 5.040.1 16.380.1 3.7801 1.2 2-O1.30.1 2-O0.90.1
Unit: mm
n NOTES
Polarity of terminals are pre-determined. Please design your circuit accordingly.
n PACKAGE Style Tube Quantity/tube (pcs ) 15 MOQ (pcs ) 30 0
4
FTR-SL SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 2, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-.0Ag-0.5Cu.
Reflow Solder condition Flow Solder condition:
Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath
Solder by Soldering Iron:
Soldering Iron Temperature: maximum 360C Duration: maximum sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test.
4. Tin Whisker
l
5
FTR-SL SERIES
Fujitsu Components International Headquarter Offices
Japan Fujitsu Component Limited Gotanda-Chuo Building -5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (8-) 5449-700 Fax: (8-) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (-408) 745-4900 Fax: (-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 22 WV Hoofddorp Netherlands Tel: (-2) 556090 Fax: (-2) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 02E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 675-8560 Fax: (65) 627-02 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/
(c)2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 8, 2008.
6


▲Up To Search▲   

 
Price & Availability of FTR-SLPK024W

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X